Samsung IC1302 (K9GAG08UOE) PN64D7000FFXZA PN59D7000FFXZA

$29.95

26 in stock

SKU: K9GAG08UOE Categories: ,

Description

Buy a brand new, programmed and tested IC1302
(NAND Flash K9GAG08UOE) Programmed for Samsung
PN64D7000FFXZA, PN59D7000FFXZA, PN51D6500DFXZA,
PN51D7000FFXZA

The EEPROM / flash memory IC1302 (NAND Flash  K9GAG08UOE) 

It will contain functional firmware for the following Samsung Mainboard and other part numbers

  • BN94-05656X
  • BN94-04689A
  • BN94-05429D
  • BN94-04689B
  • BN94-04689C
  • BN41-01605A
  • BN94-04728A


It will contain functional firmware for the following Samsung and other TV models:

  • Samsung PN64D7000FFXZA
  • Samsung PN59D7000FFXZA
  • Samsung PN51D6500DFXZA
  • Samsung UN55D6005SFXZA
  • Samsung PN51D7000FFXZA


As with most if not all other cases of failed firmware, there is no simple and definite way to test and confirm the problem is there, let alone only there.

Below are some symptoms we’ve seen caused by a defective memory IC however you should bear in mind other failures may lead to the same symptoms:

  • TV constantly resets – shows the logo Samsung Smart TV – TV continually resets without displaying logos SAMSUNG SMART TV Samsung The TV constantly resets when the application (widget) is installed
  • The TV constantly resets after approx. 2 min
  • Problems after the Installation of Widgets and Applications on the
    TVs
  • After replacing NAND, the original settings (stored in SPI Flash) and the firmware (stored in BGA Flash) remain on the TV.
  • Therefore, you need to reset the TV (by holding the EXIT button on the remote during long operation) and upload the latest firmware 001027

    We do not guarantee that this component/kit will resolve the problems with your TV. It is offered based on experience and technical information available to us at the time of publishing of this listing and is known to be more or less common for the listed models.

    NAND FULLY TESTED – NO RETURNS
  • The item can get easily damaged during fitting or by static
  • We cannot be responsible for any components damaged while fitting
  • Installations of these parts are certainly not easy and must be done by professional a technician with Micro BGA Soldering Skills
  • You may need a microscope to get it soldered properly
  • We have had to secretly mark all our items and take a record of the serial numbers of each item

Except as expressly outlined in the item description, the seller makes NO EXPRESS OR IMPLIED warranties of any kind whatsoever about his merchandise and/or services. Seller is not responsible for consequential, incidental or punitive  damages of any kind whatsoever, Seller’s liability is limited to the amount paid by
Buyer including shipping and handling charges.


Additional information

Brand

Back to Top
×